While resetting your Belkin router unplug the modem cable and make sure router is powered on. Use tooth pick or paper clip and press the reset button, count at-least 10 seconds by holding reset button. Normally, all the lights starts flashing, and router will reboot within one minute. [Read more...]
Setup Belkin Wireless G Router without CD
August 7, 2010 by · 59 Comments
Let’s say you’ve lost your original CD or your unable to setup router using CD, Still you can configure your Belkin wireless G router manually using the web interface.
Related Posts you might like:
Belkin Wireless Router Setup
Step 1 : Log on to Belkin G Setup Page
What do you do if your Belkin N600, N300 and N150 did not come with set up CD at all? It’s very easy to access Belkin settings page, make sure ethernet cables are connected properly. you can follow the above link if you’re not sure how to connect cable between router, modem and computer.
Now, type Belkin router default ip address http://192.168.2.1 by going to start and RUN window or type it in the address bar of your web browser (internet explorer/safari) and you will be able to see router settings page.
How to SetUp Belkin N Wireless Router and Troubleshoot
June 23, 2010 by · 53 Comments
If you’re reading this, the odds are you just bought yourself a new Belkin-N wireless router or your facing some issues with Belkin router setup. But, if you can’t find the answer you want, we suggest you to visit
(Step by Step Guide to configure Belkin N Router and also guides you through the process of installing settings).
Using Belkin Router you can connect multiple computers to one internet connection. Belkin 802.11 N Router is most widely used pretty old router . It doesn’t matter which internet connection your using Belkin has different series of router which supports Cable, DSL, ADSl, fiber and satellite connections. If you are setting up Belkin router for the first time it will be time consuming process if things are not in place. Follow the Belkin router setup instructions below and you will be able to access internet in all WI-FI equipped device’s like: Computers, Printers, Scanners, Gaming device’s and Smart Phones.
Guide to setup Belkin N router and modem
Checklist Before Installing Belkin wireless router
1. Make sure you are able to access internet using Cable or DSL modem. ( If not reset your modem and check) 2. If it’s a DSL connection, It requires user name and password.
3. Change the network settings in your computer: Click the “Start” button and select “Control Panel” Double click on “Network Connections. Right-click on “Local Area Connection” highlight Internet Protocol (TCP/IP) and then click on Properties button. You need to check the box which say’s (Obtain an IP Address Automatically) and (Obtain DNS Server Addresses Automatically).
Belkin Router Cable Connection
- Select any one of the LAN port on the back of the wireless router and plug the cable, other end goes to computer. (There are 4 LAN ports on the back your Belkin router choose any one)
- Now connect the modem cable to your router’s “WAN” port ( Yellow or Green color port)
- First turn ON your modem and wait for 1 minute, until modem lights get’s steady, Connect power cord on the back of your router from AC outlet.
- You can see some lights blinking on the router, wait for a minute, you will see all the lights get steady. Now Belkin N wireless router is ready for wifi, you can try connecting your laptop and other wireless devices to the Belkin router