Note: This article will show you how to? setup Belkin router manually and connect your computer to the wireless network, you can always use? installation CD for configuration, if that fails you go through the manual process.
Basic step before proceeding with any of the troubleshooting steps lets power-cycle? modem and router
- Unplug the power cord of your Internet Modem
- Power off the router by? unplugging the Belkin router from the power outlet (electric wall socket) as well. (IMPORTANT: Leave both the devices off for at least 60 seconds)
- Then power on Internet modem first by plugging power cord back in and wait for 60 seconds until all the lights gets steady.
- Once you see all the lights lit on the modem power on your Belkin router by plugging the power adapter into an electric outlet.
Now see if you can access internet if not reboot your computer and check for internet connectivity. This is the easiest workaround to fix any modem-router issues.
Let’s say you’ve lost your original CD or your unable to setup router using CD, Still you can configure your Belkin wireless? G plus router manually using? the web interface (GUI).
Related Posts you might like:
Belkin Wireless Router Setup
???? Step 1 : Log on to Belkin G Setup Page
This is applicable for? Belkin recent models N600, N300 and Belkin N150 as-well. It’s very easy to access Belkin settings page, make sure ethernet cables are connected properly. you can follow the above link if you’re not sure how to connect cable between router, modem and computer.
Now, type Belkin router ip address http://192.168.2.1? by going to start and RUN window or type it in the address bar of your web browser (internet explorer/safari/Firefox) and you will be able to see router settings page.
??? ? Step 2 😕 Belkin Default Password for log in
For new router’s by default there is no password activated, so you just have to leave it blank and click on “submit” button. Now the main page appears.
Note: If you get a message saying “incorrect password” or if ?you’ve forgotten the password/ If router is unresponsive. You have to reset the? router: Find more information on? resetting Belkin wireless router .
???? Step 3 😕 Choose your connection type
Click on “Connection type” (you will find it on the left side of page under the Internet WAN column)
Cable Broadband users : Comcast Internet, Cox Cable Internet, Charter Cable Internet, Time Warner Cable Direct and Road Runner High Speed Online etc.
- Select “Dynamic” and then click on “Next”.
- Leave ?Host Name? place blank and click next
- Now Click on “Change WAN MAC Address”.
- Just below it you will find “Clone” Click on it .
- Click on “Apply Changes”
DSL connection users : AT&T? DSL Direct, Bell-south, AOL, Verizon Direct etc
- Select “PPPOE” and click on “Next”.
- Enter the user name and password given by your Internet Service Provider.
- Save the settings. Click on the “Home” link at the top of the screen
Static connection users : Qwest.net, Sky-way, Star-band Satellite, DIRECTV Satellite etc
- Select “Static” and click on “Next”.
- You need to enter the “IP Address“, “Sub-net Mask” and “ISP Gateway Address”? Click on “Apply Changes”.
- It will prompt for “Primary DNS” and “Secondary DNS” information. Enter the required info and click on “Apply Changes”.
(note: if you don’t have these details, you need to contact your internet service provider)
How to name your? Wireless G Network & Change the Wireless Channel Number
(***If you have changed the wireless settings or you can’t remember the wifi password you can use wizard to change the password to your network)
- Click on “Channel and SSID” under”?WIRELESS” column.
- Type your network name in SSID column (you can give any name)
- For better connectivity you can select channel number as 6,10 or 11
Check the “STATUS” to the top right corner in the same page, It shows connection. Now you can connect your laptop and other wireless equipped devices and enjoy wireless internet.
Adding Windows 7 Computer to Wireless Network
- Make sure wireless switch is turned on
- Bottom right corner you will find network list, Click on it and you will find all the?available wireless networks.
If you don’t find Belkin network refresh your network list, find the screenshot of refresh button below.
- Select your network and hit connect, enter your security key when prompted.
You are welcome to comment on this article and Ask Questions using the comment box below!
Process of setting up router helps me in setting wireless router setup..
OK, I followed all the steps on this page and it still reads “Not Connected” on the status. Help please!
my disk will not run all the way for set up of Belkin wireless.
I’m using belkin wireless G router. Model F5D7234-4-H V5. My Internet connection is broadband. My router is connected. Internet is connected icon shows that. Even torrent is downloading. But I can’t browse any site. My iPhone is connected but Internet can’t accessible
Your unable to browse in computer aswell as in iphone, You can reset your belkin router and check. Also connect modem directly to your computer and check for internet connection.
belkin router setup is nightmare
I need help to rest security code on my wireless network and I don’t know what the old one is.
I forgot my pass word but I can’t reset that
How do i hook my wireless router to my ACER PC,
HI MY PROBLEM IS MY WIRELESS IS SETUP WITH BRIGHTHOUSE IT IS FINE. THAY SET IT UP FOR US SO THAT WE COULD USE LAPTOPS OFF OF OUR HOUSE COMPUTER. I NOW WANT TO USE ANOTHER HOUSE COMPUTER IN MY ROOM , AND I WAS GIVEN A BELKIN G WIRELESS ROUTER MODEL F5D7234-4 V4 SER#12913723401078. IT ALSO HAS A PINCODE AND OTHER STUFF ON THE BACK AND I DONT HAVE THE FIRST CLUE ON HOW TO SET IT UP. THE STUFF ON THIS PAGE ABOVE IS ALL WELL AND FINE IF YOU KNOW WHAT YOU ARE DOING , BUT I “DO NOT”. ALL I KNOW IS THAT I HAVE SOMETHING THAT SAYS EARTHNET OR SOMETHING IN THE BACK OF MY COMPURTER THAT HAS THE SAME HOLE AND LOOKS LIKE IT WOULD FIT THE BACK OF THE ROUTER . PLEASE HELP ME IF YOU HAVE A DISK OR SOMETHING THAT CAN SHOW ME STEP BY STEP BECUSE I HAVE NEVER HOOKED UP A ROUTER ESPECIALLY ONE THAT GOES TO ONE THAT IS ALL READY SETUP AND RUNNING. THANK’S SIGNED “IN NEED”
Hi Craig,
You are right. Connect a cable to the back of your computer to Ethernet port and connect other end to the belkin router (there are 4 LAN ports)connect to any one of this port.
Now, connect BRIGHTHOUSE modem cable directly to Internet/WAN port of your Belkin router and follow the above steps.
HI ADMIN I DID THE FIRST PART NO PROBLEM.I CONNECTED THE ETHERNET PORT FROM THE BACK OF MY COMPUTER TO THE BACK OF THE ROUTER BOTH PORTS MARKED IN YELLOW. NOW THE PROBLEM COMES. HOW CAN I HOOK UP THE MODEM CABLE,IT’S ON THE OTHER SIDE OF THE HOUSE? ALL I WANT IS TO RUN WIRELESS INTERNET IN MY BEDROOM.THE COMPUTER HAS A MODEM INSIDE OF IT SO I GOT THE ROUTER THINKING THAT I COULD PICKUP THE WIRELESS INTERNET FEED THAT IS RUNNING ON THE OTHER SIDE OF THE HOUSE WAS I WRONG? SIGNED CONFUSED. P.S. WHAT DO I NEED TO DO?
Your computer needs to be hardwired only during the router setup. Once you configure router, you can remove the cable and access wireless internet.
why my Belkin router won’t allow to connect my apple device iPhone and iPad
This was a great help. Thank you!!!
I have a spare Belkin Wireless G Router which I intended to connect to my Samsung lcd tv via wired lan cable. My plan is to connect the belkin wirelessly to my main Linksys wrt610n wireless router and use wired cable from my samsung tv to belkin wireless g router. Is this possible? thanks in advance!
Hi,
In-order to do that you have to convert your Belkin Router to an Access point (follow this link). You can also make use of Samsung WIS09ABGN LinkStick Wireless LAN Adapter so that you can connect to Linksys router directly.
Thank you for your help! After I setup the belkin wireless G router as access point, how can I connect wirelessly to my main wireless Linksys wrt610n?
My wireless g belkin network is not found on iphone..Please help
Is it possible to have 2 (two) IP settings on my Belkin Wireless Model Router?
Hey !
This is really helpfull, but I can’t go to http://192.168.2.1/ .. it says that the server at 192.168.2.1 is taking too long to respond.
What should I do?!?!?!
Please help me!
Make sure you have cable connected firmly (router to the computer). Type http://192.168.2.1 in Internet explorer or by going to Start and RUN window. If your still getting the same error- you need to reset your router.
I have everything hooked up correctly, I even reset my router. every time I put the chords in the correct place, I still can’t get on http://192.168.2.1 at all. I feel like I’m out of options.
i got the exact same problem
hey ppl….i recently bought a belkin g wireless router model:F5D7234-4-H V5…i was succesfull in connectin all the cables as instructed in the manual…the wired n power LEDs were also lit…but i done hve ny idea how to setup internet wireless or make the wireless LED glow..n also on unboxin it i dint find any installation cd….so any help will b very helpful…
You can setup Belkin wireless router without a installation disk. Please follow the above article. Let me know if you finding it difficult.
I have everything hooked up correctly, I even reset my router. every time I put the chords in the correct place, I still can?t get on http://192.168.2.1 at all. I feel like I?m out of options.
Thank you so much! This was a big help!
Hey, my question is that how can i get a software for my Belkin wireless router its asking me for a password nd idk the password HELP ASAP
Thank You Juan Carlos….
I followed this process because I am unable to find the CD to be able to re-install my wireless connection. When I log on to the Belkin page via the IP address provided I am currently showing a connected status via landline internet connection; however, when I change my connection as the instructions provided (Cable Broadband user and cloning my Mac address) I lose my connected status. The wireless connection is no longer able to connect to my wireless SSIN on the basis of the wireless security settings not matching.
When I hook up my computer directly from my cable modem, I can use ethernet. But when I hook up through my Belkin router, it says that ethernet is not connected. How do I fix that?
Reset and reconfigure the Belkin router
windows 8 has best features and it has all concept related to wireless network and its going to support all sort of routers..
I have tried so hard been two weeks to find a way why why why can’t I set my router FINALLY!
it lies!
we have cox cable internet and it’s not Dynamic!
I have to go to dns and have there it goes! geez
I don’t know if it’s just me, but now it fix it! lol
Hi there how i do i setup a password for the wireless connection, so that only people i approve of can log onto our wireless internet?
Tengo un problema con mi router belkin..lo tengo conectado a un switch de 24 puertos y de ese switch estan conectado 16 pcs..y mi conexion de navegacion es de 2048…que solucion prodria solucionar para que mi conexion no sea lenta..
hii, i have done all things as u said , bt still its showing not connected in internet status ? plzZ
Reply ASAP
REGARDS
RAVI
Please go through this article Belkin router reset as a last troubleshooting step to re-configure your router (Contact your internet service provider to choose appropriate options)
I MEAN it showing no internet access :O plz help
Hey Admin, is there any way i could see web page history of ppl who are connected to my Belkin router?? thanks
Sir in our room we have Belkin router my friends using WiFi with out interrupt with laptop. But when i am using on android phone for every 3mins WiFi disconnecting and connect auto in 5sec in my phone. What is the problem for connection loss for every 3 min? Please help me sir
hai, i am having a belkin g wireless router model F5D7234-4-H V5. am unable to configure it because in uae when am typing the ip address of modem, it is showing the site is blocked.What can i do?
dipu, you should leave Internet protocol (TCP/IPv4) to obtain an IP address automatically
Hi, we bought two Belkin Play Max routers last year but until now we could not browse the internet through wireless. We have no problem browsing using cable. The connection is from a broadband satellite to a modem to a hub then to the router. Any advice?
RED LIGHT SHOWN ON ROUTER
i need to reset my password but have no idea how to please somebody help
Please follow this steps Belkin Router reset
Sir I have Belkin g router wireless it has high speed internet . i have a problem with internet connectivity though my wireless LAN is OK i can ping router’s IP in router internet status is OK but my LAN PC is unable to browse internet. please tell me the probable cause.
Hi,
i am having a Belkin g wireless router model F5D7234-4-H V5. thanks for all your help with the above article i set up my router correctly.its working fine On PC i am able to connect to internet with the use of this router but whenever i try to connect internet to my PSP using wifi it gives me following error “communication with the server failed. a dns error has occurred (80410410)” . But u know my psp is able to scan a access point which i created using password but when i connect to internet using psp something went wrong…..please help..
thanks in advance
Error ?communication with the server failed. a dns error has occurred (80410410)?
Hi Suyog,
Login to the router with default ip 192.168.2.1 and change the wireless channel number to 1,9 or 11, I guess signal strength is not enough to connect to PSP.
If your network is password protected then change security from WEP to WPA or WPA to WEP (Wireled Equivalency Privacy). Disable the Belkin router firewall and WPS (Wifi Protected Setup) option of router and see if you can connect. You can also enter the MAC address of PSP manually configure the connection.
i have Belkin F5D7234-4-H i want to use it as a wifi router at home do i need modem or i can put LAN cable and use it? i dont have CD… any help?
Who is your Internet service provider? If its a cable connection you can connect directly and use it, Please follow the steps mentioned above, you don’t need a CD for setup.
Hi,
I recently bought a Belkin N300 Router, and lost the CD. I’ve tried configuring it with the help of this article 4 times now.
The steps seem simple and easy, but when i click connect at the end, a message saying: “The server closed the connection without sending any data.” appears.
Now, i don’t know what the problem is. My net is completely stable, all wires are intact, the modem is brand new.
Also, i noticed that even after saving changes and all that, the WAN IP, DNS, Sub-net and all that under Internets settings on the Belkin site all show 0.0.0.0 even after saving changes.
Please help. I am in distress.
Hi Pawan,
Don’t worry about it, Try Belkin Router Reset and then call up your Internet service provider and ask them for basic setup details. I am not sure what kind of connection your using.
Okay, so i called my isp call center and followed your instructions thoroughly. Finally, i was able to setup wifi for my primary laptop (for which i couldnt thank you enough!)
However, when i try to connect using other laptops/i phone, device gets connected to router, but not the internet. I have confirmed that my connection is PPPoe type. The thing is, even post configuration i need to connect to internet from my primary laptop through the isp client by filling in id password etc.
So, now the problem is due to my router settings or is the isp responsible?
howe connect the Belkin (wireless G Router ) model no F5D7230-4.. with MTNL.. pls describe step By step…
I have a Windows XP PC and a MacBook OSX Lion connected wirelessly through a Belkin Wireless G+MIMO Modem Router (F5D9630uk4A). Both can access the internet with no problems. I have tried to link the wirelessly through a Workgroup to be able to share files and for the Mac to use the USB printer connected to the PC. While I can see the Mac occasionally on the PC’s Workgroup window, I’m told that the Mac is not accessible. I can’t see the PC from the Mac, even though I have configured both for file sharing. If I connect the Mac to the router using ethernet I can see the PC’s files on the Mac and the Mac’s files on the PC. Please advise me on what to do!!
I have Access Point Belkin N150, I want to use it with another router.
When I try to connect with the Router, the light of modem and the internet not working on the Belkin N150.
what can I do to solve that Problem.
Thanks
Mahmoud
i just bought Belkin router the people that are using network cable can browse but people using wireless can not connect to the router. please help me it is urgent
Please follow the above instructions and then post your questions.
i have followed the instruction but the system that i connected it to is not recognising the 192.168.2.1 address. PLEASE WHAT SHOULD I DO?
please i log in to http://192.168.2.1 but the system replied “The connection to the server was reset while the page was loading” and i have tried it several time but it did not logg in. what can i do. please my boss is on my neck. A where will i enable wireless connection in the setup.
I have g wireless f5d7234 v 5 router…i just config it successfully…..it working…but when i restart my modem n router…..it was not working….some time it work some time not …m totally confused what to do…plz help me
I have a Belkin N450 Wireless N+ Router. It was working just fine last night. This morning, the router works hardwire but is not even seen as a wireless connection option. I have gone to the website and re-setup the router. Still not showing as a wireless connection option. Help! Please.
Hi Alice,
Do you see the wireless light lit on the router! Refresh your network list and check whether your network is listed or not! or else you have to setup Belkin router changing the network name (SSID)
I want to move my router from the room where the modem is, to the more centrally located room where my cable box and TV are…can I plug it into the Ethernet slot in the back of the cable box (Comcast)?
please help i got charter internet my belkin router will not connect to the internet model f5d7234 all i get is a yellow trangle when no connection on my phone it says conneted but its not yellow trangle on it to… im sorry for being not able to explain better just dont know what to do but cry : ( thank you very much for any help i have tryed for days and belkin wants to charge me 125.00 dollors to help me !!!ty shelby
PURCHASE THIS BELKIN G+MIMO FROM A SECOND CHANCE STORE WITH NO INSTRUCTION
For all those who tried above method but failed ( mee too).
1) connect Belkin router as explained above….use only wifi method to connect with your PC(do not connect with Lan wire)…you can get wifi key written below of router.
2) type CMD in run….type IPCONFIG in CMD….it will show you default gateway Ip…which is mainly 192.168.2.1
3) type 192.168.2.1 on internet explorer and you will get Belkin set up page. Kindly update this page as per your internet configuration
i have Belkin F5D7234-4- H. First i use to get conncection in my house in all the 3 rooms but suddently after 1 yr i am only getting the connection in the room where the Router & PC is connected. Now i cannot use my Laptop & Wifi on Mobile in any other rooms.
pls advise how do i solve my problem
Thanks
Naseem
Thank You
Hi im trying to have wifi connection but it doesn’t work ive tried everything even resetting the router I have a belkin g plus mimo router and im having so much trouble!! and it tells me that I have no connection…
i have just bought the belkin f5d7234-4-v5. the laptop is detecting the signal but asking the security key?? what do i do ? the password for previous modem is not being accepted…
Had been using Belkin wireless for my company-provided computer, running off our charter bundled service (only 1 line into the house). Had to get new work PC sent to me, lost several hours with help desk until revealed new PC is not Wi-Fi ready, also will not install drivers for my adaptive keyboard. Both were used without trouble until now. New work PC is hard-wired to Charter service, can’t reverse Belkin wireless connection for our home PC, so no home PC Internet to even troubleshoot. Help!